Installation and Operation Manual
7 KB1096066
Uponor Combi Port M-ProX Rail+valves top
Top mounting rail including set of preinstalled ball valves for heat interface unit
Dimensioning codes:
x6 – quantity of ball valves included in set (6 pcs)
DN20 – ball valve size
MT – male thread connection
FT – female thread connection
Item details
| Name | Amount | Detail |
|---|---|---|
 1095658 / - / - Uponor Combi Port M-ProX Rail+valves top x6,DN20,MT/FT | productFamilyDetail/tab/itemDetails/detailLink |
Documents
Technical manuals
Technical information
12 KB1094902
Technical Information Combi Port and Aqua Port (1094902)
About
Specification
- port completely assembled and pressure tested
- DVGW certified PM Valve with patented triple-sealing technology
- pipe clamps made of plastic for sound protection and thermal decoupling
- 2 heat exchangers: for heating and domestic hot water
- thermostatic bypass valve
- secondary heating circulation pump with temperature control
- spacer for heat meter 110 mm x3/4"
- spacer for water meter 110 mm x3/4"
- fill and drain valve
- strainer for cold water 0,5 mm
- strainer for primary heating supply line 0,5 mm
- connection possibility (marked) of an electrical earthing lug
- max. operating pressure heating: PN10
- max. operating pressure sanitary: PN10
- max. operating temperature: 85 °C
- min. pressure primary sanitary: 2 bar
- max. differential pressure primary heating: 2,5 bar
- fitting material sanitary: CW617N
- fitting material heating: CW617N, CW614N
- pipe work: stainless steel 1.4401
- including cabinet cover, white powder coated (RAL 9016)
Application
- Decentralized instantaneous domestic hot water generation
- Underfloor heating systems
- Radiator heating systems
Certification
- DVGW approval
Product drawings
Label drawings
Rendered
79 B
90 B
29 B
Similar products
Uponor Combi Port M-ProX Heat Bypass top
Supply lines preheating function with accessory bypass line (supplied lose) for the installation with Combi Port M-ProX Heat Interface unit.
Uponor Combi Port M-ProX Filling Loop IH
Flexible connection hose with ball valves and fittings for filling the heating circuit side with water
Uponor Combi Port M-ProX HeatInterface IH
IH version for domestic hot water and indirect heating systems using second heat exchanger with heating circuit connections including heating pump and expansion tank mounted on the side of heat interface unit.
Dimensioning codes:
15, 21 – domestic hot water capacity indication (l/min)
CB – copper brazed stainless steel heat exchanger for domestic hot water preparation
BP – supply lines preheating function
DI – primary differential pressure controller at the heat interface unit inlet
TL – thermostatic temperature limiter for domestic hot water with submersible sensor
ZH – apartment heating circuit circulation arrangement, including circulation pump, thermostatic flow controller and expansion tank
CR – heat interface metal cover casing white powder coated (RAL 9016)
NI – no pipe insulation and/or insulated cover
NC – no cold water outlet from heat interface unit