Uponor Combi Port M-ProX HeatInterface IH

IH version for domestic hot water and indirect heating systems using second heat exchanger with heating circuit connections including heating pump and expansion tank mounted on the side of heat interface unit.
Dimensioning codes:
15, 21 – domestic hot water capacity indication (l/min)
CB – copper brazed stainless steel heat exchanger for domestic hot water preparation
BP – supply lines preheating function
DI – primary differential pressure controller at the heat interface unit inlet
TL – thermostatic temperature limiter for domestic hot water with submersible sensor
ZH – apartment heating circuit circulation arrangement, including circulation pump, thermostatic flow controller and expansion tank
CR – heat interface metal cover casing white powder coated (RAL 9016)
NI – no pipe insulation and/or insulated cover
NC – no cold water outlet from heat interface unit

Item details

1095636

Uponor Combi Port M-ProX HeatInterface IH 15 CB BP DI TL ZH CR NI NC

1095637

Uponor Combi Port M-ProX HeatInterface IH 21 CB BP DI TL ZH CR NI NC

Documents

Technical manuals
Approval Certificate

Installation and Operation Manual

7 KB1096066

Installation and Operation Manual Combi Port PRO XU (1096066)

Technical information

12 KB1094902

Technical Information Combi Port and Aqua Port (1094902)

Approval Certificate

157 B1120388

UPONOR CER COMBI PORT OTHERS MECH KIWA WATERTEC 2009722 GB EN (1120388)

About

Specification

- port completely assembled and pressure tested
- DVGW certified PM Valve with patented triple-sealing technology
- pipe clamps made of plastic for sound protection and thermal decoupling
- 2 heat exchangers: for heating and domestic hot water
- thermostatic bypass valve
- secondary heating circulation pump with temperature control
- spacer for heat meter 110 mm x3/4"
- spacer for water meter 110 mm x3/4"
- fill and drain valve
- strainer for cold water 0,5 mm
- strainer for primary heating supply line 0,5 mm
- connection possibility (marked) of an electrical earthing lug
- max. operating pressure heating: PN10
- max. operating pressure sanitary: PN10
- max. operating temperature: 85 °C
- min. pressure primary sanitary: 2 bar
- max. differential pressure primary heating: 2,5 bar
- fitting material sanitary: CW617N
- fitting material heating: CW617N, CW614N
- pipe work: stainless steel 1.4401
- including cabinet cover, white powder coated (RAL 9016)