Installation and Operation Manual
10 KB1143303
Uponor Combi Port M-Pro HeatInterface RC
RC version for domestic hot water and direct heating with radiator connection (no mixing circuit).Dimensioning codes:15,19 – domestic hot water capacity indication (l/min)CB – copper brazed stainless steel heat exchanger for domestic hot water preparationSt – free of non-ferrous metal brazed stainless steel heat exchanger for domestic hot water preparationBP – supply lines preheating functionDI – primary differential pressure controller at the heat interface unit inletDT – differential pressure controller at the heat interface unit heat circuit for domestic hot water preparationTL – thermostatic temperature limiter for domestic hot water with submersible sensorRL – return temperature limiter for apartment heating circuitZM – circulation module for domestic hot water with safety valve, circulation pump, and differential pressure regulator. A waste water connection is needed.ZV – zone valve in residential heating circuit return line without actuator
Item details
Documents
Technical manuals
Technical information
12 KB1094902
Technical Information Combi Port and Aqua Port (1094902)
About
Specification
- port completely assembled and pressure tested- technical limits of use in water for heating and plumbing are shown in technical data sheets- pipe clamps made of plastic for sound protection and thermal decoupling- DVGW certified PM Valve with patented triple-sealing technology- thermal insulation at the supply pipes- thermostatic bypass valve- cold water outlet- spacer for heat meter 110 mm x3/4"- spacer for water meter 110 mm x3/4"- venting and drainage valve- strainer for cold water 0,5 mm- strainer for primary heating supply line 0,5 mm- Connection possibility (marked) of an electrical earthing lug- max. operating pressure heating: PN10- max. operating pressure sanitary: PN10- max. operating temperature: 85 °C- max. differential pressure primary heating: 2,5 bar- min. pressure sanitary: 2,0 bar- fitting material sanitary: CW617N- fitting material heating: CW617N, CW614N- pipe material: stainless steel 1.4401- measurements: W/H/D 556 x 620 x 110 mm
Application
- Decentralized instantaneous domestic hot water generation- Underfloor heating systems- Radiator heating systems
Certification
- DVGW approval
Product drawings
Z-drawing
Rendered
Label drawings
294 B
294 B
Download document290 B
290 B
Download document287 B
287 B
Download document295 B
295 B
Download document294 B
294 B
Download document290 B
290 B
Download document287 B
287 B
Download document295 B
295 B
Download document294 B
294 B
Download document294 B
294 B
Download document117 B
117 B
Download document737 B
737 B
Download document120 B
120 B
Download document621 B
621 B
Download document118 B
118 B
Download document619 B
619 B
Download document121 B
121 B
Download document625 B
625 B
Download document212 B
212 B
Download document230 B
230 B
Download document221 B
221 B
Download document223 B
223 B
Download document217 B
217 B
Download document225 B
225 B
Download document1 KB
1 KB
1 KB
154 B
154 B
Download document141 B
141 B
Download document149 B
149 B
Download document148 B
148 B
Download document153 B
153 B
Download document149 B
149 B
Download document147 B
147 B
Download document