Catalogue
733 Results found
Uponor S-Press PLUS radi crossing insulated
- For cross-over-free connection of a radiator on the raw floor
- Incl. insulation box, consisting of upper and lower part made of EPP (expanded polypropylene) with 13 mm insulation layer (corresponds to 50 % insulation in compliance with EnEV), WLG 035. Meets EnEV requirements in respect of pipe cross-overs and wall penetrations!
- Dimensions of insulation box
(Length x Width x Height): 115 x 115 x 55 mm.
Uponor S-Press PLUS radi elbow adapter unplated
- Made of DR-brass
- With copper pipe 15 x 1 mm
- The connection of the copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).
Uponor S-Press PLUS radi elbow adapter plated
- With copper pipe 15 x 1 mm and 22 x 1 mm, plated.
- The connection of the plated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).
Uponor S-Press PLUS adapter baseboard
- For baseboard mounting and the universal connection of Uponor MLC and Unipipe PLUS pipes with outside diameters 16 and 20 mm to valve radiators with connection from the bottom
- Thread acc. to EN ISO 228-1
Uponor S-Press PLUS tap elbow mount.Unit radi
- Pre-mounted unit contains of two Uponor Smart Aqua tap elbows S-Press 16-1/2FT
- Rotation protected installed on mounting angle.
Uponor S-Press PLUS pressure test plug O-ring
- as spare part for pressure testing plug
Uponor S-Press elbow PPSU
- Fast installation with easy bevel and without calibration
- Colour code
Uponor S-Press elbow 45deg PPSU
- Fast installation with easy bevel and without calibration
- Colour code
Uponor S-Press coupling PPSU
- Fast installation with easy bevel and without calibration
- Colour code
Uponor S-Press reducer PPSU
- Fast installation with easy bevel and without calibration
- Colour code
Uponor S-Press reducer PPSU
Uponor S-Press tee PPSU
- Fast installation with easy bevel and without calibration
- Colour code