Technical information
12 KB1094902
Uponor Combi Port M-BaseX HeatInterface IH
IH version for domestic hot water and indirect heating systems using second heat exchanger with heating circuit connections including heating pump and expansion tank mounted on the back of heat interface unit.
Dimensioning codes:
15, 21, 27 – domestic hot water capacity indication (l/min)
CB – copper brazed stainless steel heat exchanger for domestic hot water preparation
6D – all system connections in the bottom of heat interface unit
TL – thermostatic temperature limiter for domestic hot water with submersible sensor
ZV – zone valve in residential heating circuit return line without actuator
ZH – apartment heating circuit circulation arrangement, including circulation pump, thermostatic flow controller and expansion tank
CR – heat interface metal cover casing white powder coated (RAL 9016)
NI – no pipe insulation and/or insulated cover
NC – no cold water outlet from heat interface unit
Item details
| Name | Amount | Detail |
|---|---|---|
| productFamilyDetail/tab/itemDetails/detailLink | ||
| productFamilyDetail/tab/itemDetails/detailLink | ||
| productFamilyDetail/tab/itemDetails/detailLink |
Documents
Technical manuals
About
Specification
- port completely assembled and pressure tested
- DVGW certified PM Valve with patented triple-sealing technology
- pipe clamps made of plastic for sound protection and thermal decoupling
- 2 heat exchangers: for heating and domestic hot water
- secondary heating circulation pump with temperature control
- spacer for heat meter 110 mm x3/4"
- spacer for water meter 110 mm x3/4"
- fill and drain valve
- strainer for cold water 0,5 mm
- strainer for primary heating supply line 0,5 mm
- connection possibility (marked) of an electrical earthing lug
- max. operating pressure heating: PN10
- max. operating pressure sanitary: PN10
- max. operating temperature: 85 °C
- min. pressure primary sanitary: 2 bar
- max. differential pressure primary heating: 2,5 bar
- fitting material sanitary: CW617N
- fitting material heating: CW617N, CW614N
- pipe work: stainless steel 1.4401
- including cabinet cover, white powder coated (RAL 9016)
Application
- Decentralized instantaneous domestic hot water generation
- Underfloor heating systems
- Radiator heating systems
Certification
- DVGW approval
Product drawings
Label drawings
Rendered
Z-drawing
162 B
162 B
Download document157 B
157 B
Download document152 B
152 B
Download document312 B
312 B
Download document312 B
312 B
Download document312 B
312 B
Download documentSimilar products
Uponor Combi Port M-BaseX Rail+valves bottom
Bottom mounting rail including set of preinstalled ball valves for 6D execution of heat interface unit
Dimensioning codes:
x6 – quantity of ball valves included in set (6 pcs)
DN20 – ball valve size
MT – male thread connection
FT – female thread connection