Uponor Siccus Mini panel
- XPS panel 1.200x600x15mm- With full-face heat transfer layer of Aluminium- With integrated pipe grooves c-c100mm- For use with Uponor Comfort Pipe Minitec 9.9
- XPS panel 1.200x600x15mm- With full-face heat transfer layer of Aluminium- With integrated pipe grooves c-c100mm- For use with Uponor Comfort Pipe Minitec 9.9
- Synthetic fibre panel 1.000x600x6mm- Decoupling layer for floorings of ceramic tiles and natural stone on top of Siccus Mini- For use with Siccus Mini panel only
- Synthetic fibre strip 1.000x45x15mm- Mandatory edge support on wall sides and in doorways in Siccus Mini installations with flooring of ceramic tiles and natural stone
- For seamless taping of butt joints of Siccus Mini tilebacker panels.- Necessary for installations with ceramic tiles and natural stone
- hot cutting tool 230V with cutting insert to cut grooves for 9.9mm pipes inside Siccus Mini panels
- installation panel with preinstalled Aluminium heat spreaders included- EPS 150- R=0.4 m²K/W
- installation panel with grooves- for feeders of radiant loops- EPS Compressive strength: = 150 kPa- R=0.4 m²K/W
- pre-cut equipped for easy size to measure- aluminium heat spreader for use in Uponor dry UFH systems using pipe 12mm
- installation panel with grooves- EPS compressive strength: = 150 kPa- R=0.622 m²K/W
- aluminium heat spreader for use in Uponor dry UFH systems using pipe 14mm- pre-cut equipped for easy size to measure- material consumption = 5.6 pcs/m² (c-c150mm)
- cutting tool for Uponor PS cutters for 14mm pipe grooves
- Mandatory edge support for installation with flooring of ceramic tiles and natural stoneas- Edge support on wall sides and in door ways