Uponor Siccus Mini tilebacker tape
- For seamless taping of butt joints of Siccus Mini tilebacker panels.
- Necessary for installations with ceramic tiles and natural stone
Item details
| Name | Amount | Detail |
|---|---|---|
 1139795 / - / - Uponor Siccus Mini tilebacker tape 143mm 12m | productFamilyDetail/tab/itemDetails/detailLink |
Documents
Technical manuals
Product Information Siccus Mini levelling material (1142400)
About
Specification
- Uponor Siccus Mini is a dry installation UFH system in low profile design, with prefabricated full-surface integrated heat conducting layer made of aluminium; according to EN 1264; design B.
- Panels made from XPS 400 with pipe spacing 100mm
- For installation with Uponor Comfort Pipe 9.9mm
Application
- radiant underfloor heating and cooling for dry-build installations
- direct flooring with laminate, wood parquet
- extra tilebacker layer 6mm for ceramic tiles and natural stone
- specified gypsum board for vinyl and carpet flooring
Certification
- DINCERTCO 7F515-F (laminate, wood parquet)
- DINCERTCO 7F514-F (ceramic tiles, natural stone)
- DINCERTCO 7FXXX-F (18mm gypsum layer for vinyl and carpet)
Product drawings
Rendered
Label drawings
Z-drawing
Similar products
Uponor Siccus Mini hotcutter tool
- hot cutting tool 230V with cutting insert to cut grooves for 9.9mm pipes inside Siccus Mini panels
Uponor Siccus Mini edge support
- Synthetic fibre strip 1.000x45x15mm
- Mandatory edge support on wall sides and in doorways in Siccus Mini installations with flooring of ceramic tiles and natural stone
Uponor Siccus Mini tilebacker panel
- Synthetic fibre panel 1.000x600x6mm
- Decoupling layer for floorings of ceramic tiles and natural stone on top of Siccus Mini
- For use with Siccus Mini panel only
Uponor Siccus Mini panel
- XPS panel 1.200x600x15mm
- With full-face heat transfer layer of Aluminium
- With integrated pipe grooves c-c100mm
- For use with Uponor Comfort Pipe Minitec 9.9