Uponor S-Press PLUS adapter male thread
- made of tin-plated DR brass
- Thread acc. to EN ISO 228-1
Item details
| Name | Status | Amount | Detail |
|---|---|---|---|
 1091728 / - / - Uponor S-Press PLUS adapter male thread 16-G3/8"MT | Item available on request, minimum lead time 2 weeks | productFamilyDetail/tab/itemDetails/detailLink |
Documents
Technical manuals
Environmental Product Declaration (EPD)
Installation Report MLC leak test report TW water (1120119)
Installation Report MLC flushing protocol TW water (1120120)
Installation Report MLC leak test report TW air-gas (1120118)
Installation Report MLC leak test report HC water (1120121)
Technical Information MLC tap water and heating (1119966)
Uponor EPD S-Press PLUS (1162875)
About
Specification
- Unique press indicator
- Fast 3-step installation (press without bevel)
- Innovative QR code for immediate digital access
- Colour code
- Fixed press sleeve with insprection window
- Precise jaw fixation
- Fast diameter recognition
- Accurate test safety function
- 100% backward compatible with existing Uponor components
- Flow rate optimized fitting body
Application
-Heating systems (high temperature radiators) - where the water temperature does not continuously exceed 80ºC, 10 bar (Conditions to application Class 5 - BS EN ISO 21003-1:2008). The maximum short-term malfunction temperature is 100ºC for an accumulative 100 hours over the working life of the system. (Heating systems must be installed with room and water temperature controls in accordance with the current Building Regulations Parts L1 (Energy – Dwellings) and L2 (Energy – Non Dwellings) for England and Wales, or an equivalent national standard for Scotland or Republic of Ireland).
-Cold water domestic services: 0°C to 20°C where the water temperature does not exceed 20ºC, 16bar.
-Hot water domestic services: 20°C to 70°C where the water temperature does not continuously exceed 70ºC, 10 bar (Conditions to application Class 2 - BS EN ISO 21003-1:2008). The maximum short-term malfunction temperature is 95ºC for an accumulative 100 hours over the working life of the system.
-Uponor multilayer pipe can be used for DHW recirculating systems, provided the operating temperatures and pressures do not exceed the maximum conditions detailed under 'Domestic Services'
-Chilled water: -10°C to 10°C,10 bar. If risk of damage from freezing, a suitable anti-freeze additive must be used. Any additive must be suitable for use with Polyethylene, PPSU, EPDM and CW625N brass
if not different mentioned:
- Male and female threads acc.to EN 10226-1.
Certification
-WRAS : 1903901 - Uponor S-Press PLUS, S-Press PLUS, PPSU, MLC and SAC 16-32mm
-2101339 : Manifolds and adapters
-KIWA – UK water Regulation 4
-Manufacturing is in accordance with the international quality standard ISO 9001 and environmental standard ISO 14001.
Product drawings
Rendered
Z-drawing
Label drawings
Similar products
Uponor S-Press PLUS elbow swivel nut
- Made of tin-plated DR brass
- Releasable screw connector for connection to on-wall fittings, filters and shut-off valves
- Thread acc. to EN ISO 228-1.
Uponor S-Press PLUS mount. Unit sound p.
- Tap end elbows with unique press indicator
- Rotation protected installed on mounting angel with integrated sound protection incl. drainage function
- Sound protection according to VDI 4100 SST 1 / SST 2 / SST 3* (* for drywall installation) and DIN 4109
- Drainage of possible leakage water according to DIN 18534
Uponor S-Press PLUS tap elbow mount.Unit Gemini
- Rotation protected installed on mounting angel
Uponor S-Press PLUS radi crossing insulated
- For cross-over-free connection of a radiator on the raw floor
- Incl. insulation box, consisting of upper and lower part made of EPP (expanded polypropylene) with 13 mm insulation layer (corresponds to 50 % insulation in compliance with EnEV), WLG 035. Meets EnEV requirements in respect of pipe cross-overs and wall penetrations!
- Dimensions of insulation box
(Length x Width x Height): 115 x 115 x 55 mm.