Installation Manual
169 B1066449
Uponor Smart Radi connection unit box
- Made of polystyrene with removable protective cap (WLS 040)
- Insulation box, flame resistant, B1 acc. to DIN 4102
- 100% acc. EnEV in outer wall
Item details
| Name | Amount | Detail |
|---|---|---|
| productFamilyDetail/tab/itemDetails/detailLink | ||
| productFamilyDetail/tab/itemDetails/detailLink |
Documents
Technical manuals
Installation Report
116 B1120119
Installation Report MLC leak test report TW water (1120119)
Installation Report
127 B1120120
Installation Report MLC flushing protocol TW water (1120120)
Installation Report
110 B1120118
Installation Report MLC leak test report TW air-gas (1120118)
Installation Report
127 B1120121
Installation Report MLC leak test report HC water (1120121)
Technical information
6 KB1119966
Technical Information MLC tap water and heating (1119966)
Application information
Specification
- Fittings and accessories for radiator connection
- Q&E rings must be ordered separately if not different mentioned
Application
- Heating with high and with low tempertaure radiators
Product drawings
Similar products
Uponor Smart Radi compr. connection set Danfoss
- Made of coated brass
- pressure screw with male thread, with inner sleeve and clamp ring, fit to Danfoss radiator valves with female thread
- O-Ring, blue, made of EPDM.
Uponor Smart Radi adapter sealed
- Made of coated brass
- self-sealing
- For the connection of radiators with 1/2 female thread connectors, 3/4 male thread eurocone for the connection of Cu-pipe, 15 x 1 mm, with clamp compression adapter.
Uponor Smart Radi adapter plated
- Made of coated copper pipe
- copper pipe 15 x 1 mm with self sealing thread for the connection to radiator
- Fits to all Uponor press tap elbow MLC, press tap wall plate MLC and press female connection 1/2" MLC
- Connection to the radiator with the Uponor eurocone compression adapter Cu.
Uponor Smart Radi elbow adapter plated Q&E
- With coated copper pipe 15 x 1 mm.
- The connection of the coated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).