Uponor Smart Radi adapter plated
- Made of coated copper pipe
- copper pipe 15 x 1 mm with self sealing thread for the connection to radiator
- Fits to all Uponor press tap elbow MLC, press tap wall plate MLC and press female connection 1/2" MLC
- Connection to the radiator with the Uponor eurocone compression adapter Cu.
Item details
Name | Amount | Detail |
---|---|---|
productFamilyDetail/tab/itemDetails/detailLink |
Documents
Technical manuals
Installation Report MLC flushing protocol TW water (1120120)
Installation Report MLC leak test report TW air-gas (1120118)
Installation Report MLC leak test report HC water (1120121)
Technical Information MLC tap water and heating (1119966)
Application information
Specification
- Fittings and accessories for radiator connection
- Q&E rings must be ordered separately if not different mentioned
Application
- Heating with high and with low tempertaure radiators
Product drawings
Similar products
Uponor Smart Radi cover plate dividable
- Made of polypropylene white
- for Uponor Uni Pipe PLUS and MLC pipes 14 - 20 mm, to cover floor and/or wall penetration of the radiator connection pipe line
- Required inside micrometer (pipe middle - middle) between two Uponor MLC pipes for supply and return flow: 50 mm. The cascaded penetrations can be severed easily with a knife according to desired pipe dimension.
- The snap ring consists of two halves, which are pressed together with two push buttons by hand
- Fire classification B2 acc. to EN 13501-1.
Uponor Smart Radi compr. connection set Danfoss
- Made of coated brass
- pressure screw with male thread, with inner sleeve and clamp ring, fit to Danfoss radiator valves with female thread
- O-Ring, blue, made of EPDM.
Uponor Smart Radi elbow adapter plated Q&E
- With coated copper pipe 15 x 1 mm.
- The connection of the coated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).
Uponor Smart Radi compr. connection set Heimeier
- Made of coated brass
- pressure screw with male thread, with inner sleeve and clamp ring, fit to Heimeier radiator valves with female thread
- O-Ring, grey, made of EPDM.