Installation Report
116 B1120119
Uponor Smart Radi adapter
- With 3/4FT eurocone, elastically sealing, for the connection of the coated copper pipe 15 x 1 mm of the Uponor press connection elbow, Uponor press connection tee to the tap battery, radiator or Uponor radiator connection adapter with 3/4FT eurocone.
- Coated brass union nut, brass clamp ring blank and sealing cone made of EPDM.
- Ribbed union nut with wrench size 27.
Item details
| Name | Amount | Detail |
|---|---|---|
| productFamilyDetail/tab/itemDetails/detailLink |
Documents
Technical manuals
Installation Report
127 B1120120
Installation Report MLC flushing protocol TW water (1120120)
Installation Report
110 B1120118
Installation Report MLC leak test report TW air-gas (1120118)
Installation Report
127 B1120121
Installation Report MLC leak test report HC water (1120121)
Technical information
6 KB1119966
Technical Information MLC tap water and heating (1119966)
Application information
Specification
- Fittings and accessories for radiator connection
- Q&E rings must be ordered separately if not different mentioned
Application
- Heating with high and with low tempertaure radiators
Product drawings
Rendered
Label drawings
Z-drawing
387 B
387 B
Download document97 B
82 B
164 B
164 B
Download documentSimilar products
Uponor Smart Radi cover plate dividable
- Made of polypropylene white
- for Uponor Uni Pipe PLUS and MLC pipes 14 - 20 mm, to cover floor and/or wall penetration of the radiator connection pipe line
- Required inside micrometer (pipe middle - middle) between two Uponor MLC pipes for supply and return flow: 50 mm. The cascaded penetrations can be severed easily with a knife according to desired pipe dimension.
- The snap ring consists of two halves, which are pressed together with two push buttons by hand
- Fire classification B2 acc. to EN 13501-1.
Uponor Smart Radi adapter plated
- Made of coated copper pipe
- copper pipe 15 x 1 mm with self sealing thread for the connection to radiator
- Fits to all Uponor press tap elbow MLC, press tap wall plate MLC and press female connection 1/2" MLC
- Connection to the radiator with the Uponor eurocone compression adapter Cu.
Uponor Smart Radi bend support
- Made of white plastic.
- For radiator connections from the floor with PE-Xa and MLC pipes in dimension 16.
- Dividable, for conduit 25/20 mm.
- Min. c/c 40 mm, including 5 mm distance.
Uponor Smart Radi adapter sealed
- Made of coated brass
- self-sealing
- For the connection of radiators with 1/2 female thread connectors, 3/4 male thread eurocone for the connection of Cu-pipe, 15 x 1 mm, with clamp compression adapter.