Installation Manual
728 B1140275
Uponor Base condensation set S-80
- Condensation set suited for condensation control
- Functions:
--- evaluates received dew point information and activates integrated contact when dew point is reached
--- supports up to 5 dew point sensors
--- sensor suited for installation in plastered ceilings/walls or cold-water pipe conduits
--- recommended condensation set for X-80 for cooling applications
- Options:
--- installation on external DIN rail
--- operating voltage: 230V / 50-60 Hz
- Consisting of:
--- 230V converter dew point
--- Sensor dew point
Item details
| Name | Amount | Detail |
|---|---|---|
 1140221 / - / - Uponor Base condensation set S-80 230V | productFamilyDetail/tab/itemDetails/detailLink |
Documents
Technical manuals
System Description (SD)
135 B1140523
System Description Base condensation set S-80 230V (1140523)
Product Information
564 B1068132
Product Information Smatrix actuator compatibility (1068132)
Application information
Specification
- 230V standard wiring
- common wiring method and controls logic
- easy integration to standard on/off time control
- optional: pump logic
Application
- wired room temperature control for radiant heating
Certification
- CE, UKCA
Product drawings
Similar products
Uponor Base controller H pump X-60
- Controller with autobalance function for 230V standard wiring
--- supports up to 6 thermostats (230V)
--- supports up to 12 actuators (230V), with 2 actuators at a time that follow a common thermostat (6x 2 actuators)
--- noiseless actuator switching
--- autobalancing in heating optimises energy use and comfort
--- switch to enable/disable the autobalance function
--- pump relay
--- time limit by-pass with autobalance
--- input: day/night switch
--- 4 wires for thermostat connection
--- works with 3 wires thermostat (2 wires for power supply 230 V, 1 output 230 V demand) and 4 wires thermostat for full functionality (day/night signal)
--- connection terminals for thermostat/actuator 0,13 ... 1,5 mm²
--- overload protection
--- protection class: IP20
- Consisting of:
--- Uponor Base controller X-60
--- without power cable
--- mounting material, DIN rail included
Uponor Base controller H/C pump X-80
- Controller with autobalance function for 230V standard wiring
--- supports up to 10 thermostats (230V)
--- supports up to 12 actuators (230V) which can be fully flexible assigned
--- noiseless actuator switching
--- supports heating and cooling application
--- autobalancing in heating optimises energy use and comfort
--- switch to enable/disable the autobalance function
--- pump and boiler relay
--- time limit by-pass with autobalance
--- inputs: heating/cooling switch, condensation, day/night switch.
--- 4 wires for thermostat connection
--- works with 3 wires thermostat (2 wires for power supply 230 V, 1 output 230 V demand) and 4 wires thermostat for full functionality (day/night signal)
--- connection terminals for thermostat/actuator 0,13 ... 1,5 mm²
--- overload protection
--- protection class: IP20
- Note: for cooling condensation set S-80 is recommended
- Consisting of:
--- Uponor Base controller X-80
--- without power cable
--- mounting material, DIN rail included
Uponor Base sensor remote
- remote sensor for T-26 or thermostat 1047457
- for min/max floor temperature
- length: 3m