Uponor Base controller X-23
- supports up to 6 thermostats (230V)
- supports up to 14 actuators (230V)
- overload protection
- power: 10VA
- protection class: IP40
Consisting of:
- Uponor Base controller X-23
- mounting material
Item details
| Name | Amount | Detail |
|---|---|---|
 1058426 / - / - Uponor Base controller X-23 230V | productFamilyDetail/tab/itemDetails/detailLink |
Documents
Technical manuals
EU declaration of conformity
Product Information Smatrix actuator compatibility (1068132)
Application information
Specification
- 230V standard wiring
- common wiring method and controls logic
- easy integration to standard on/off time control
- optional: pump logic
Application
- wired room temperature control for radiant heating
Certification
- CE, UKCA
Product drawings
Other
Rendered
Similar products
Uponor Base thermostat T-24 flush
- printed scale on dial thermostat for flush installation
- simple on/off control (bimetall)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- setpoint range: +5°C … +30°C
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: pure white, glossy
Consisting of:
- Uponor Base thermostat flush T-24 230V
- outer frame 81x85x44.5mm
- cover 50x50mm
Uponor Base flexiboard X-24
- supports up to 6 thermostats (230V)
- supports up to 12 actuators (230V)
- rotary channel selector switch for quick actuator assignment
- overload protection
- power: 10VA
- protection class: IP40
Consisting of:
- Uponor Base flexiboard X-24
- mounting material
Uponor Base controller H/C pump X-80
- Controller with autobalance function for 230V standard wiring
--- supports up to 10 thermostats (230V)
--- supports up to 12 actuators (230V) which can be fully flexible assigned
--- noiseless actuator switching
--- supports heating and cooling application
--- autobalancing in heating optimises energy use and comfort
--- switch to enable/disable the autobalance function
--- pump and boiler relay
--- time limit by-pass with autobalance
--- inputs: heating/cooling switch, condensation, day/night switch.
--- 4 wires for thermostat connection
--- works with 3 wires thermostat (2 wires for power supply 230 V, 1 output 230 V demand) and 4 wires thermostat for full functionality (day/night signal)
--- connection terminals for thermostat/actuator 0,13 ... 1,5 mm²
--- overload protection
--- protection class: IP20
- Note: for cooling condensation set S-80 is recommended
- Consisting of:
--- Uponor Base controller X-80
--- without power cable
--- mounting material, DIN rail included
Uponor Base flexiboard X-26
- supports up to 8 thermostats (230V)
- supports up to 12 actuators (230V)
- rotary channel selector switch for quick actuator assignment
- overload protection
- power: 10VA
- protection class: IP40
Consisting of:
- Uponor Base flexiboard X-26 8X
- mounting material