Catalogue
1082 Results found
Uponor Smatrix Base thermostat T-143 Bus public
- measures perceived room temperature
- protection class: IP30
- color: white glossy
Functions:
- potentiometer on rear side to adjust setpoint temperature
- tamper detector
- dry contact input for forced ECO via e.g. SMS module or BMS
- dry contact input for heating/cooling changeover
- dip switch for function/sensor selection
- optional: floor, outdoor or remote sensor can be connected
Consisting of:
- Uponor Smatrix Base thermostat public T-143 Bus
- mounting material
Uponor Smatrix Base wallframe Style T-149 A-14X
- T-149 surface adaptor for on-wall installation
- incl. mounting material
- color: white RAL9016
Uponor Smatrix Base wallframe style T-149 A-14x black
- T-149 surface adaptor for on-wall installation
- incl. mounting material
- color: black
Uponor Smatrix Base bus cable A-145
- 4-wire bus cable allows to connect Uponor Smatrix Base / Base PRO devices
- 2 wires for power supply / 2 wires for data transmission
- shielding: aluminium/polyester foil with tracer strand
- temperature range: -20°C ... +80°C
- cross section: AWG22
- sheath: PVC
- rated voltage: 400VAC/DC
Uponor Smatrix Base slave module M-140 Bus
- 6 channel slave module for Uponor Smatrix Base controller X-145 Bus 6X and Uponor Smatrix Base PRO controller X-147 Bus 6X and Uponor Smatrix Base pro controller X-148 Modbus RTU
- supports up to 6 room thermostats and 6 actuators
- click-in installation
- protection class: IP20
- color: grey
Uponor Smatrix Base star module M-141 Bus
- 6 channel star module for Uponor Smatrix Base controller X-145 Bus 6X and Uponor Smatrix Base PRO controller X-147 Bus 6X
- flexible wiring approaches possible (star topology)
- supports up to 6 room thermostats
- protection class: IP20
- color: grey
Uponor Smatrix Base timer I-143 Bus
- set time start up wizard
- holiday mode
- comfort/ECO indication
- manual H/C switchover function
- 6 pre-programmed schedules
- 1 freely programmable schedule
- ECO setback value setting
- clock reset
- timer functions
- Autobalancing de-/activation
- backlight
- displays software version on start-up
- protection class: IP30
- color: white glossy
Consisting of:
- Uponor Smatrix Base timer I-143 Bus
- mounting material
Uponor Smatrix Base PRO controller X-147 Bus
- supports up to 6 room thermostats and 8 actuators
- option to extend up to 12 room thermostats and 14 actuators with 1071686
- max. power input per actuator: 24VAC / 0.2A (0.4A peak)
- protection class: Class II IP20
- color: grey RAL7015
Consisting of:
- Uponor Smatrix Base PRO controller X-147 Bus 6X
- quick guide, security instructions
- micro SD card (pre-inserted)
- DIN rail (length: 37cm)
- mounting material
Uponor Smatrix Base PRO controller X-148 Modbus RTU
- suited for Modbus RTU systems
- supports up to 6 room thermostats and 8 actuators with option to extend to 12 room thermostats and 14 actuators (with 1071686)
- contains data points for heat pump integration
- max. power input per actuator: 24VAC / 0.2A (0.4A peak)
- protection class: Class II IP20
Consisting of:
- Uponor Smatrix Base PRO controller X-148 Modbus RTU
- quick guide, security instructions
- DIN rail (length: 37cm)
- mounting material
Uponor Smatrix Base PRO interface I-147 Bus
- sparepart touchpanel for Uponor Smatrix Base controller X-147 Bus 6X
- protection class: Class II IP20
- color: white RAL9016
Consisting of:
- Uponor Smatrix Base PRO interface I-147
- power supply
- mounting material
- wall bracket
- instruction leaflet
Uponor Smatrix Base PRO room sensor RH style T-141 Bus flush
- room temperature and relative humidity sensor (flush mounted)
- protection class: IP30
- color: white RAL9016
Consisting of:
- Uponor Smatrix Base PRO room sensor+RH Style T-141 Bus
- mounting material
Uponor Smatrix Base PRO gateway module R-147 KNX
- connects a Uponor Smatrix Base PRO controller X-147 with a BMS or third-party KNX devices
- power supply: 230VAC (+10%/-15%) / 50/60Hz
- internal fuse: T5 F3.15AL 250V, 5x20 3.15A quick acting
- operating temperature: 0°C ... +45°C
- storage temperature: -20°C ... +70°C
- max. consumption: 45W
- power connection: 1m cable with europlug
- connection terminals for system bus: 0.2mm² ... 1.5mm²
- protection class: IP20 II
Functions:
- room temperatur from Uponor Base or third-party KNX thermostats
- room setpoint from Uponor Base or third-party KNX thermostats
- room relative humidity from Uponor Base or third-party KNX thermostats
- room floor temperatur from Uponor Base or third-party KNX thermostats
- actuator status from Uponor Base or third-party KNX system
- foreced ECO from Uponor Base PRO or third-party KNX system
- pump output from Uponor Base or third-party KNX system
- boiler output from Uponor Base or third-party KNX system
- heating/cooling curve settings/circuit from Uponor Move PRO to BMS or vice versa
- heating/cooling modes from Uponor Base PRO to BMS or vice versa
Consisting of:
- gateway module R-147 KNX
- power supply
- mounting material (2 screws and 2 wall plugs)
- quick guide