Catalogue

- EPS panel 1.200x600x15mm
- Without heat transfer layer of Aluminium

- Synthetic fibre panel 1.000x600x6mm
- Decoupling layer for floorings of ceramic tiles and natural stone on top of Siccus Mini
- For use with Siccus Mini panel only

- Synthetic fibre strip 1.000x45x15mm
- Mandatory edge support on wall sides and in doorways in Siccus Mini installations with flooring of ceramic tiles and natural stone

- For seamless taping of butt joints of Siccus Mini tilebacker panels.
- Necessary for installations with ceramic tiles and natural stone

- hot cutting tool 230V with cutting insert to cut grooves for 9.9mm pipes inside Siccus Mini panels

- installation panel with preinstalled Aluminium heat spreaders included
- EPS 150
- R=0.4 m²K/W

- installation panel with grooves
- for feeders of radiant loops
- EPS Compressive strength: = 150 kPa
- R=0.4 m²K/W

- pre-cut equipped for easy size to measure
- aluminium heat spreader for use in Uponor dry UFH systems using pipe 12mm

- installation panel with grooves
- EPS compressive strength: = 150 kPa
- R=0.622 m²K/W

- aluminium heat spreader for use in Uponor dry UFH systems using pipe 14mm
- pre-cut equipped for easy size to measure
- material consumption = 5.6 pcs/m² (c-c150mm)

- cutting tool for Uponor PS cutters for 14mm pipe grooves

- Installation with full-face heat transfer layer of Aluminium
- With integrated pipe grooves c-c 150mm
- EPS compressive strength: 400 kPa