Uponor Wipex tee

Uponor Wipex tee

- Cylindric thread G" with sealing ring
- 6 bar, SDR 11 / 10 bar, SDR 7,4
- DR = dezincification resistance brass

Item details

NameAmount
Detail
productFamilyDetail/tab/itemDetails/detailLink
productFamilyDetail/tab/itemDetails/detailLink
productFamilyDetail/tab/itemDetails/detailLink
productFamilyDetail/tab/itemDetails/detailLink

Documents

Installation Manual
1 KB1068123

Installation Manual Wipex base part (1068123)

Installation Report
162 B1120218

Installation Report Ecoflex pressure test heating (1120218)

Installation Report
137 B1120219

Installation Report Ecoflex pressure test water pipes (1120219)

Product Information
968 B1142158

PI Ecoflex pipe systems UK 1142158

Technical information
10 KB1120217

Technical Information Ecoflex piping systems (1120217)

Approval Certificate
98 B1135541

UPONOR CER WIPEX FIT MECH WRAS 2112320 UK EN (1135541)

Approval Certificate
147 B1119454

UPONOR CER Ecoflex SYS MECH KIWA WATERTEC 2504718 GB EN (1119454)

Approval Certificate
262 B1119413

UPONOR CER Ecoflex FIT MECH WRAS 25054005 GB EN (1119413)

About

Specification

- Wipex fittings in corrosion-resistant brass, dezincification based on EN ISO 6509 with stainless steel screw.
- O-ring sealing between Wipex coupling and base fitting connectors
- Bolt set for couplers include a hex socket bolt in stainless steel and the nut as well as washer from brass
- Pre-open sleeve design with assembled support part for the dimension 63-110mm.

Application

- Fittings for pipe systems Thermo, Aqua, Quattro, Supra, Supra PLUS and Supra Standard
- Connection of PE and PE-Xa medium pipe to couplers with cylindrical inch male thread
- Max. operating temperature 95°C

Certification

- Approvals should be checked by local responsible person

Product drawings

1018345_REN
1018345
560 B
1018345_REN
1018345
129 B
1018346_REN
1018346
114 B
1018347_REN
1018347
113 B
1018348_REN
1018348
106 B
1018345_ZMD
1018345
82 B

Similar products

Uponor Ecoflex elbow

Uponor Ecoflex elbow

- Thread Rp", hemp sealing
- 6 bar, SDR 11 / 10 bar, SDR 7,4
- DR = dezincification resistance brass