Uponor Base controller box 8X UK
- supports up to 8 thermostats
- supports up to 16 actuators
- pump control
- boiler control
- night set back, 2 time zones
- overload protection
- optional: 2 time zone night setback if connected to timer (1002133 sold seperatly)
- effective power per TA 230: 3W
- protection class: IP20
Consisting of:
- Uponor Base controller box 8X
- connection port for time clock
- cable clambs
- mounting material
Item details
Name | Amount | Detail |
---|---|---|
productFamilyDetail/tab/itemDetails/detailLink |
Documents
Approval Certificate
EU declaration of conformity
About
Specification
- 230V standard wiring
- common wiring method and controls logic
- easy integration to standard on/off time control
- optional: pump logic
Application
- wired room temperature control for radiant heating
Certification
- CE, UKCA
Product drawings
Other
Similar products
Uponor Base thermostat display T-27
- LCD display presents temperature in big sized digits
- Noisless operation due to triac electronics
- Capacitive keys on the front and full display glass for easy cleaning
- Comfort / Eco mode
- Valve exercise
- Option to connect remote sensor (to be ordered seperately 1071684)
--- Floor sensor modes: internal, external, internal + external
- Mounting: on wall and on standard European flush mounting box
- Neat and easy wiring with Uponor Base X-23 and Uponor Base flexiboard X-24, X-25, X-26, X-27
- Protection class : IP30
Uponor Base thermostat T-26 dig. prog.
- in-side port for floor/remote sensor connection
- fully programmable - 5/2 or 7 day with four heat levels per day
- multiple regulation control choice - air only, floor only, air and floor
- holiday mode with override feature
- optimised start
- lock facility - tamper proof setting
- status display on current thermostat mode
- powered by base unit (Uponor Base controller X-23)
- optional: remote sensor (sold seperatly 1047459)
- setpoint range: +5°C … +35°C
- protection class: IP20
- color: ~RAL9010
Uponor Base controller H pump X-60
- Controller with autobalance function for 230V standard wiring
--- supports up to 6 thermostats (230V)
--- supports up to 12 actuators (230V), with 2 actuators at a time that follow a common thermostat (6x 2 actuators)
--- noiseless actuator switching
--- autobalancing in heating optimises energy use and comfort
--- switch to enable/disable the autobalance function
--- pump relay
--- time limit by-pass with autobalance
--- input: day/night switch
--- 4 wires for thermostat connection
--- works with 3 wires thermostat (2 wires for power supply 230 V, 1 output 230 V demand) and 4 wires thermostat for full functionality (day/night signal)
--- connection terminals for thermostat/actuator 0,13 ... 1,5 mm²
--- overload protection
--- protection class: IP20
- Consisting of:
--- Uponor Base controller X-60
--- without power cable
--- mounting material, DIN rail included
Uponor Base thermostat T-23 standard
- printed scale on dial thermostat
- simple on/off control (bimetall)
- setting range can be limited mechanically by moving pins under the dial
- powered by base unit (Uponor Base controller X-23)
- setpoint range: +5°C … +30°C
- wire: 4x 1.5mm²
- max. cable length: 100m
- protection class: IP30
- color: RAL 9010