Product Online Catalogue

- steel mesh for mounting of pipe fixations of underfloor heating pipes
- material: steel

- steel clip usable to fix pipe to steel mesh
- for use with Uponor tool for metallic clip

- installation panel with grooves
- EPS compressive strength: = 150 kPa
- R=0.622 m²K/W

- aluminium heat spreader for use in Uponor dry UFH systems using pipe 14mm
- pre-cut equipped for easy size to measure
- material consumption = 5.6 pcs/m² (c-c150mm)

- panel with embedded piping
- active surface of Renovis system

- panel with embedded piping
- active surface of Renovis system
- single packed panel

- Emitter made of 16 x 2,0 mm Uni Pipe PLUS with 10 pipe rows and up to 37,3 m per m² module.
- For grid distances of CD-profiles of 333mm
- The pipe is 100% diffusion-resistant according to DIN 4726.
- Cooling capacity according to EN 14240 (8K) up to 67 W/m²
- Heating capacity according to EN 14037 (15K) up to 105 W/m².
- Sound absorption according to DIN EN ISO 354 with αw between 0,60 to 0,65.
- Capacity and acoustic values depending on gypsum board.

- clamp track fixation clip
- for pipes 25 mm

- made of PE-LD, for protection of UFH pipes 25mm in areas of expansion joints

- Includes: 2x brackets short, 2x brackets long, 2x filling valve brass, 2x thermometer 0 - 60°C, 1x manometer, 2x endcap, 2x flat sealing screw connection piece with swivel nut, 1x mounting material: 8x screws 6x60mm, 8x plastic anchor 8x40mm, 2x flat sealing 44x32x2

- For connection with additional segments and basic kit
- Supply-segment with control valves for preadjustment
- Return-segment with thermostat upper section incl. cap for locking
- Uponor actuator can be mounted directly on the return
- Heating loop connection for PE-Xa Pipe 25x2,3 with compression adapter