Uponor Uni Pipe PLUS white
- coil
- High dimensional stability, low expansion rates
- Increased flexibility
- 100% oxygen barrier
Item details
Documents
Technical manuals
DGNB Declaration
Installation Report MLC leak test report TW water (1120119)
Installation Report MLC flushing protocol TW water (1120120)
Installation Report MLC leak test report TW air-gas (1120118)
Installation Report MLC leak test report HC water (1120121)
Technical Information MLC tap water and heating (1119966)
Application information
Specification
- Oxygen diffusion resistant multi-layer composite pipe (PE-RT - adhesive – seamless aluminium/longitudinally welded aluminium - adhesive - PE-RT) produced using SACP and OWC-technology.
- Fire classification E according to EN 13501-1.
- With pipe end caps as hygienic seal according EN 806.
Application
- Tested/Approved according EN ISO 21003 Multilayer piping systems for hot and cold water installations inside buildings for application class 1,2,4,5/10bar
- Tap water: The permanent operating temperature ranges from 0°C to 70°C at a maximum permanent operating pressure of 10 bar. The short-term malfunction temperature is 95°C for a period of 100 hours in the operating life time.
- Heating: The permanent operating temperature ranges up to 80°C at a maximum permanent operating pressure of 10 bar. The short-term malfunction temperature is 100°C for a period of 100 hours in the operating life time.
Certification
- Approvals by local OM.
E.g.
- DVGW
- AENOR
Product drawings
Z-drawing
Rendered
Label drawings
Similar products
Uponor Uni Pipe PLUS white insulated S4 WLS 040
- coil
-Insulation thickness 4 mm
- thermal conductivity λ=0,040 W/m*k
- round extruded
Uponor Uni Pipe PLUS white insulated S6 WLS 035
- coil
- Insulation thickness 6 mm
- thermal conductivity λ=0,035 W/m*k
- round extruded
Uponor Uni Pipe PLUS white in conduit
- coil
- pipe in conduit
Uponor Uni Pipe PLUS white insulated S10 WLS 035
- Insulation thickness 10 mm
- thermal conductivity λ=0,035 W/m*k
- round extruded