Technical information
6 KB1119966
Uponor S-Press PLUS sound + leak protect
- Set is suitable for two Uponor S-Press PLUS tap elbows 16-Rp1/2"FT or 20-Rp1/2"FT
- Pins and screws M6 x 16 included
- Made of EPP
- Sound protection acc., VDI 4100
- Drainage function conform to DIN 18534
Item details
| Name | Amount | Detail |
|---|---|---|
| productFamilyDetail/tab/itemDetails/detailLink |
Documents
Technical manuals
Application information
Specification
- Unique press indicator
- Fast 3-step installation (press without bevel)
- Innovative QR code for immediate digital access
- Colour code
- Fixed press sleeve with insprection window
- Precise jaw fixation
- Fast diameter recognition
- Accurate test safety function
- 100% backward compatible with existing Uponor components
- Flow rate optimized fitting body
Application
- Tap water: The permanent operating temperature ranges from 0°C to 70°C at a maximum permanent operating pressure of 10 bar. The short-term malfunction temperature is 95°C for a period of 100 hours in the operating life time.
- Heating: The permanent operating temperature ranges up to 80°C at a maximum permanent operating pressure of 10 bar. The short-term malfunction temperature is 100°C for a period of 100 hours in the operating life time.
if not different mentioned:
- Male and female threads acc.to EN 10226-1.
Certification
- Approvals by local OM.
E.g.
- DVGW
- AENOR
Product drawings
Rendered
Z-drawing
Label drawings
293 B
293 B
Download document115 B
115 B
Download document121 B
121 B
Download document89 B
Similar products
Uponor S-Press PLUS adapter male thread
- Made of tin-plated DR brass
Uponor S-Press PLUS radi elbow adapter plated
- With copper pipe 15 x 1 mm and 22 x 1 mm, plated.
- The connection of the plated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).
Uponor S-Press PLUS radi crossing insulated
- For cross-over-free connection of a radiator on the raw floor
- Incl. insulation box, consisting of upper and lower part made of EPP (expanded polypropylene) with 13 mm insulation layer (corresponds to 50 % insulation in compliance with EnEV), WLG 035. Meets EnEV requirements in respect of pipe cross-overs and wall penetrations!
- Dimensions of insulation box
(Length x Width x Height): 115 x 115 x 55 mm.