Technical information
6 KB1119966
Uponor S-Press PLUS mounting plate
- Made of galvanized steel.
- For the installation of Uponor Smart Aqua tap elbows
- Positioning of the connections in the given raster
- Plastic pins and loss protected screws M6x12 acc. DIN 965 included
- With holes and slots for easy attachment
Item details
| Name | Amount | Detail |
|---|---|---|
 1121197 / - / - Uponor S-Press PLUS mounting plate 80/150mm | productFamilyDetail/tab/itemDetails/detailLink |
Documents
Technical manuals
Application information
Specification
- Unique press indicator
- Fast 3-step installation (press without bevel)
- Innovative QR code for immediate digital access
- Colour code
- Fixed press sleeve with insprection window
- Precise jaw fixation
- Fast diameter recognition
- Accurate test safety function
- 100% backward compatible with existing Uponor components
- Flow rate optimized fitting body
Application
- Tap water: The permanent operating temperature ranges from 0°C to 70°C at a maximum permanent operating pressure of 10 bar. The short-term malfunction temperature is 95°C for a period of 100 hours in the operating life time.
- Heating: The permanent operating temperature ranges up to 80°C at a maximum permanent operating pressure of 10 bar. The short-term malfunction temperature is 100°C for a period of 100 hours in the operating life time.
if not different mentioned:
- Male and female threads acc.to EN 10226-1.
Certification
- Approvals by local OM.
E.g.
- DVGW
- AENOR
Product drawings
Similar products
Uponor S-Press PLUS tap elbow L
- Made of tin-plated DR brass
- for on wall installation or attachment with rotation protection to the Uponor Smart Aqua mounting angles and plates.
Uponor S-Press PLUS adapter PPM
- adapter Aqua PLUS
Uponor S-Press PLUS radi crossing insulated
- For cross-over-free connection of a radiator on the raw floor
- Incl. insulation box, consisting of upper and lower part made of EPP (expanded polypropylene) with 13 mm insulation layer (corresponds to 50 % insulation in compliance with EnEV), WLG 035. Meets EnEV requirements in respect of pipe cross-overs and wall penetrations!
- Dimensions of insulation box
(Length x Width x Height): 115 x 115 x 55 mm.
Uponor S-Press PLUS elbow 45deg
- Made of tin-plated DR brass