Uponor RS elbow

Uponor RS elbow

- Made of tin-plated brass
- Base part for all RS2 or RS3 inserts including 2 lock pins.

Item details

NameAmount
Detail
productFamilyDetail/tab/itemDetails/detailLink
productFamilyDetail/tab/itemDetails/detailLink

Documents

Installation Report
116 B1120119

Installation Report MLC leak test report TW water (1120119)

Installation Report
127 B1120120

Installation Report MLC flushing protocol TW water (1120120)

Installation Report
110 B1120118

Installation Report MLC leak test report TW air-gas (1120118)

Installation Report
127 B1120121

Installation Report MLC leak test report HC water (1120121)

Technical information
6 KB1119966

Technical Information MLC tap water and heating (1119966)

Installation Manual
1 KB1062301

Installation Manual Uni Pipe PLUS (1062301)

Approval Certificate
409 B1013450

UPONOR SAMPLE MLC PIPE WHITE 50X4,5 LENGTH 30CM

Approval Certificate
409 B1013402

UPONOR SAMPLE MLC PIPE WHITE 32X3 LENGTH 30CM (1013402)

DGNB Declaration
295 B1141468

UPONOR DGNB RS Fittings (1141468)

Application information

Specification

- with fixed press sleeve
- stop ring
- colour code
- Test safety

Application

- Tap water: The permanent operating temperature ranges from 0°C to 70°C at a maximum permanent operating pressure of 10 bar. The short-term malfunction temperature is 95°C for a period of 100 hours in the operating life time.
- Heating: The permanent operating temperature ranges up to 80°C at a maximum permanent operating pressure of 10 bar. The short-term malfunction temperature is 100°C for a period of 100 hours in the operating life time.

if not different mentioned:
- Male and female threads acc.to EN 10226-1.

Certification

- Approvals by local OM.
E.g.
- DVGW
- AENOR

Product drawings

1029138_REN
1029138
539 B
1029138_REN
1029138
156 B
1029139_REN
1029139
156 B
1029138_LAB
1029138
121 B
1029139_LAB
1029139
121 B
1029138_ZMD
1029138
126 B
1029139_ZMD
1029139
126 B

Similar products

Uponor RS tee

Uponor RS tee

- Made of tin-plated brass
- Base part for all RS2 or RS3 inserts including 3 lock pins.