Manifolds, Cabinets and Pumpgroups

- For Vario S manifolds
- Connection to actuator: M30x1,5

- For Vario S
- Flow range 0-5 l/min

- ball valve with swivel nut to connect directly to the manifold
- for stainless steel Vario C manifold without primary connection

- 24V actuator retrofit set
- incl. 3 bayonet manifold valve adaptor rings, mounting instructions
- interface between existing third-party manifolds and Uponor Smatrix control system
- compatible to 80% of existing third-party manifolds
- open/closed indicator
- NC (normally closed) = closes without power
- first open function
- Autobalancing functionality for new and retrofit installations
- temperature range: 0°C…60°C
- height: 58mm + adaptor ring
- color: blue
- adaption list can be found at: www.uponor.com/download-centre
- stroke length: 5mm
- connection cable: 2x 0.75mm² x 1m
- Ucoil: 24V/50Hz
- Pcoil: 1W
- diameter: 44.3mm

- Vario M, S manifold actuator
- first open function,
- height: 61 mm + adaptor ring
- stroke length: 5mm
- connection cable: 2x 0.75mm²x1m

- incl. 4 bayonet manifold valve adaptor rings, mounting instructions
- compatible to Vario B WGF and 80% of existing third-party manifolds
- first open function,
- height: 61 mm + adaptor ring
- stroke length: 5mm
- connection cable: 2x 0.75mm²x1m

- Set of spare adapters (2 pcs.) for actuators cooperating with Vario manifolds
- for Vario M, S manifold - 1 psc.
- for Vario PLUS, MAGNA manifold - 1 psc.

- Integrated pump: Q: 0,1 - 0,4 m³/h, H: 0,2 - 1,1 m, Phyd< 1W
- Bracket for left- or right installation
- Air bleed screw
- Secondary circuit temp. range 20-50°C
- Balancing valve
- Secondary loop 3/4"" eurocone
- Primary valves with clampconnection for CU-Pipe 15mm
- For control of UFH in small zones
- Max. primary temperature: 90°C
- Max. secondary temperature: 55°C
- Pumpgroup with thermostat 12-28°C
- Secondary max. temperature limiter by 50°C
- Room sensor head with capillary sensor

- Integrated pump: Q: 0,1 - 0,4 m³/h, H: 0,2 - 1,1 m, Phyd< 1W
- Bracket for left- or right installation
- Air bleed screw
- Secondary circuit temp. range 20-50°C
- Balancing valve
- Secondary loop 3/4"" eurocone
- Primary valves with clampconnection for CU-Pipe 15mm
- For control of UFH in small zones
- Max. primary temperature: 90°C
- Max. secondary temperature: 55°C
- With cartridge heater for UFH in summer mode
- Room temperature control by controller X-161
- Compatible to Uponor Smatrix Wave thermostats T-166, T-168 , T-169
- With safety sensor against overheating
- Secondary max. temperature limiter by 50°C

- Integrated pump: Q: 0,1 - 0,4 m³/h, H: 0,2 - 1,1 m, Phyd< 1W
- Bracket for left- or right installation
- Air bleed screw
- Secondary circuit temp. range 20-50°C
- Balancing valve
- Secondary loop 3/4" eurocone
- Primary valves with clampconnection for CU-Pipe 15mm
- For control of UFH in small zones
- Max. primary temperature: 90°C
- Max. secondary temperature: 55°C
- Pumpgroup with actuator 230 V and cable room sensor
- Secondary max. temperature limiter by 50°C

- Integrated pump: Q: 0,1 - 0,4 m³/h, H: 0,2 - 1,1 m, Phyd< 1W
- Bracket for left- or right installation
- Air bleed screw
- Secondary circuit temp. range 20-50°C
- Balancing valve
- Secondary loop 3/4" eurocone
- Primary valves with clampconnection for CU-Pipe 15mm
- For control of UFH in small zones
- Max. primary temperature: 90°C
- Max. secondary temperature: 55°C
- Pumpgroup with actuator 230 V, wireless thermostat and wireless receiver
- Secondary max. temperature limiter by 60°C

- Pumpgroup pre-mounted
- Water temperature and flow rates controlled by thermostat with capillary sensor,
- Air bleed screw
- Max. primary temperature: 90°C
- Max. secondary temperature: 55°C
- Balancing valve primary
- Secondary connection G1 (MT)
- For installation left or right of manifold
- Maximal heat load: 10 kW
- kvs flow valve: 1,2 m3/h