Radiant Heating & Cooling

- Includes: 2x brackets short, 2x brackets long, 1x mounting material: 8x screws 6x60mm, 8x plastic anchor, 8x40mm

- Flow and Return as single segment
- Industrial Basic Kit and Uponor Bayonet Joint is necessary

- Made of brass
- For PE-Xa
- Item 1058341 is not compatible with item 1005403 and 1005420
- Item 1058342 is not compatible with item 1005404 and 1005421

- With shut-off function
- Made of fibreglass reinforced Polyamid

- clamp track for pipes 20 / 25mm
- c-c 50mm

- Zinc-coated
- Without backplane
- Made-to-order with not returnable delivery
- Useable for the Magna manifolds

- or lifting, precise height adjustment and stabilising the pipe level relative to the upper reinforcement
- for bar thickness up to 4mm
- height depending on slab construction.
- Material : steel
- No. required : 4 per m²

- Patented element is designed that after concreting, the pipes can be pulled out under the ceiling slab and connected to the manifold or supply line below the ceiling.
- For pipes up to 20 mm.
- Stackable for alignement to other elements.
- A small red flag indicates pull direction of the pipe.
- Delived including nails for fixing to supports.
- Length: 540 mm
- Width: 39 mm
- Height: 29 mm
- Max. height: 57 mm (at the connection point)

- Allows monitoring the test pressure with color code
- Apply 4bar
- It shows green color while pressure is higher than 2 bar. Below 2 bar is turning yellow and later red.

- for the connection of additional, external cooling/heating or peak load elements
- With Q&E connection.
- Type 2

- To connect the thermal socket outside the concrete ceiling
- With 1/2" FT elbow connecton.
- Type 2

- To connect the thermal socket outside the concrete ceiling
- With Push 15 elbow connecton with possibility to adapt Uponor actuator
- Type 2