Multilayer Pipe Systems

- lever ball valve
- made of brass

- For cross-over-free connection of a radiator on the raw floor

- For cross-over-free connection of a radiator on the raw floor
- Incl. insulation box, consisting of upper and lower part made of EPP (expanded polypropylene) with 13 mm insulation layer (corresponds to 50 % insulation in compliance with EnEV), WLG 035. Meets EnEV requirements in respect of pipe cross-overs and wall penetrations!
- Dimensions of insulation box
(Length x Width x Height): 115 x 115 x 55 mm.

- Made of DR-brass
- With copper pipe 15 x 1 mm
- The connection of the copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).

- With copper pipe 15 x 1 mm and 22 x 1 mm, plated.
- The connection of the plated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).

- With cranked copper pipe 15 x 1 mm, plated
- The connection of the plated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).

- For baseboard mounting and the universal connection of Uponor MLC and Unipipe PLUS pipes with outside diameters 16 and 20 mm to valve radiators with connection from the bottom
- Thread acc. to EN ISO 228-1

- Pre-mounted unit contains of two Uponor Smart Aqua tap elbows S-Press 16-1/2FT
- Rotation protected installed on mounting angle.

- as spare part for pressure testing plug

- Fast installation with easy bevel and without calibration
- Colour code

- Fast installation with easy bevel and without calibration
- Colour code

- Fast installation with easy bevel and without calibration
- Colour code