Products
79 Results found
Basic end caps
Basic end caps close the end of TruFLOW Jr. manifolds. Required gaskets are included.
Brass manifold combination adapter fitting adapters
Brass manifold adapters allow either a straight copper pipe or a copper fitting adapter to sweat to the brass manifold adapter. The R32 side couples with the R32 union connection on the brass manifolds.
Brass manifold loop end caps
Brass manifold loop end caps close off unused R20 manifold loop connections. Install supplied brass manifold loop end cap gaskets (A2400020) with the loop end caps to ensure a proper seal
Commercial stainless-steel manifold loop end caps
The Commercial Stainless-steel Manifold Loop Cap closes off unused loops on the manifold. The Uponor Commercial Stainless-steel Manifold is used for distribution and loop isolation in hydronic hot-water heating, chilled water, radiant heating and cooling, snow and ice melting, and permafrost prevention (cold storage) applications.
End caps with vent
End caps with vent close the end of TruFLOW Jr. manifolds. They come complete with a swivel drain valve and a manual air vent. Required gasket (A2620005) is included.
ProPEX manifold elbow adapters
ProPEX manifold adapters for brass manifolds transition from the R32 manifold union nut to 3⁄4", 1", 11⁄4" and 11⁄2" Uponor PEX tubing.
ProPEX manifold fitting assemblies
ProPEX manifold fitting assemblies with ProPEX insert connect 3⁄8" though 3⁄4" Uponor PEX tubing to stainless-steel, brass and EP heating manifolds. Sold as a two-piece assembly, they include a ProPEX insert and R20 swivel nut.
ProPEX manifold straight adapters
ProPEX manifold adapters for brass manifolds transition from the R32 manifold union nut to 3⁄4", 1", 11⁄4" and 11⁄2" Uponor PEX tubing.
QS-style compression manifold fitting assemblies
QS-style compression fitting assemblies connect 5/16", 3⁄8", 1⁄2" and 5⁄8" Uponor PEX tubing to stainless-steel, brass and EP heating manifolds and R20 fittings. Sold as a three-piece assembly.
QS-style compression rings
QS-style compression rings are replacement parts that are designed and tested for use with Uponor PEX tubing. Note: Do not substitute similar compression rings.
Threaded brass manifold straight adapters and bushings
Threaded brass manifold straight adapters and bushings transition the R32 manifold union nut to PEX or MLC tubing with QS-style fittings.
TruFLOW classic manifold elbow unions
TruFLOW Classic manifold elbow unions feature an R32 union by 11⁄4" BSP male connection. They are designed to make tight, 90-degree turns from the TruFLOW Classic manifold supply and return connections. Use silicone lubricant on the male threads to ease installation.