Use 5/16" repair couplings for 5/16" PEX x 5/16" PEX.Note: One-piece repair coupling comes as an assembly. No other fittings are necessary. For all other sizes of tubing, see ProPEX EP couplings section on pages 98-99. EP couplings are suitable for direct burial.
| Name | Status | Detail | ||
|---|---|---|---|---|
| Active | Download submittal | productFamilyDetail/tab/itemDetails/detailLink |
ProPEX stainless-steel male threaded adapters transition Uponor AquaPEX tubing to reverse-osmosis units. Due to the aggressive nature of conditioned water produced by reverse osmosis, de-ionization and distillation, ProPEX stainless-steel fittings are manufactured from 316 stainless steel, and fully comply with CSA B137.5.Note: ProPEX tool is required. ProPEX rings sold separately.
Use TruFLOW visual flow meters on TruFLOW Jr. and TruFLOW Classic manifolds to accurately measure the flow of hydronic radiant loops.Note: For proper operation, install flow meters on the return manifold.
The Commercial Stainless-steel Manifold Loop Cap closes off unused loops on the manifold. The Uponor Commercial Stainless-steel Manifold is used for distribution and loop isolation in hydronic hot-water heating, chilled water, radiant heating and cooling, snow and ice melting, and permafrost prevention (cold storage) applications.
ProPEX LF brass sweat adapters transition Uponor AquaPEX tubing to copper pipe.Note: Do not press these adapters. For copper press applications, use the ProPEX LF brass copper press adapters. ProPEX tool is required. ProPEX rings sold separately.