Uponor S-Press PLUS U-tap elbow mixer
- Fixed stainless steel sleeve- for inwall mixer and flushing tank connection in serial and loop installation.
- Fixed stainless steel sleeve- for inwall mixer and flushing tank connection in serial and loop installation.
- Made of tin-plated DR brass- For on wall installation or attachment with rotation protection to the Uponor Smart Aqua mounting angles and plates. - Thread acc. to EN ISO 228-1
- For lead-through through walls.- Dimensions of attachment plate (H x W x D) 100 x 50 x 2 mm.- Hole circle diameter 33 mm.
- Incl. twist-proof attachment and sound protection- For lead-through through walls.
- Incl. twist-proof attachment and sound protection- For lead-through through walls.
- Made of galvanized steel.- For the installation of Uponor Smart Aqua tap elbows- Positioning of the connections in the given raster- Plastic pins and loss protected screws M6x12 acc. DIN 965 included- With holes and slots for easy attachment
- Made of galvanized steel.- For the installation of Uponor Smart Aqua tap elbows- Positioning of the connections in the given raster- Plastic pins and loss protected screws M6x12 acc. DIN 965 included- With holes and slots for easy attachment
- For cross-over-free connection of a radiator on the raw floor- Incl. insulation box, consisting of upper and lower part made of EPP (expanded polypropylene) with 13 mm insulation layer (corresponds to 50 % insulation in compliance with EnEV), WLG 035. Meets EnEV requirements in respect of pipe cross-overs and wall penetrations! - Dimensions of insulation box (Length x Width x Height): 115 x 115 x 55 mm.
- With copper pipe 15 x 1 mm and 22 x 1 mm, plated. - The connection of the plated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).